1.Product Feature

①Use high brightness high CRI SMD 3030 chip，life span 50,000 hours,5 Years Guarantee

②120VAC Triac Dimming Driver

③the light Angle of ＞120 degrees

④Application: Home, Office, Shopping Malls

⑤Replace up to 80-120W Halogen Bulb

2.Product Parameter

Model  SMD Type&Qty  IP Grade  Product description Base  N.W  

 YRDL-09045-004D  SMD3030/12珠  IP20  4" LED Downlight Retrofit-9 Watts  E26Gu24  0.15KG 

 YRDL-13065-004D  SMD3030/15珠  IP20  6" LED Downlight Retrofit-13 Watts  0.20KG 

Model  Power Input Volt  efficiency  Power factor dimmble  Cert. 

 YRDL-09045-004D  9W  120Vac  >89%  >0.9  YES  UL/ES 

 YRDL-13065-004D  13W  120Vac  >90%  >0.9  YES  UL/ES 

 Model

  Color Temp.

  Lumnious

  Beam angle

  CRI

  YRDL-09045-004D

  2500-6500K(UL)  

  >90LM/W

  >120±5°

  >80

  YRDL-13065-004D

  >90LM/W

  >80

3.Lux Parameter

Model Lux  diameter（cm) 

 A B  C   A  B  C 

 YRDL-09045-004D  303 75  33   186  372  558 

 YRDL-13065-004D  450  112  50  232  464  696 

4.Packing Parameter

Model  Material  Carton Size（mm)  CTN/PCS  G.W 

 YRDL-09045-004D  white box insidehard carton box  L640*W485*H480   60   14KGS 

 YRDL-13065-004D  L640*W485*H480  24  8KGS 

5.Installation

Step 1 Twist Adapter into Socket

Step 2 Insert Male Connector into Female Connector

Step 3 Insert LED into Can Housing(Recessed Can Housing Not Included)

6.Instruction

1.Please read the product specification carefully, and confirm the use environment is in line with the specifications, on the condition of before install and use.

2.Before the product is plugged into a power supply, please ensure the switch is in off state.

3.Lamps and lanterns should be installed by a qualified electrician, electrical wiring conforms to the IEE standards or national standards;

4.This product is suitable for indoor.

5.Do not under the condition of voltage too high or too low, use for a long time, will affect the normal use function and life;

6.Not installed in the fuel use, no matter what circumstances, lamps and lanterns can't are covered with insulating material or similar material.

7.When install, replace, clean lamps and lanterns, must cut off power supply, ensure the personal safety;

8.When found abnormal work of lamps and lanterns (self-extinguishing, flash), please check the attachment plug contact performance, and the power supply voltage is normal, if normal, fault has not ruled out, need to change the new light;

9.Need to clean the surface of lamps and lanterns, please disconnect the power supply! Dry with soft cloth glued soapy water after cleaning, wipe with dry cloth again, please don't use banana oil wait to wipe the surface of lamps and lanterns of volatile substances, please do not spraying the lamps and lanterns of any chemicals, lamps and lanterns may change color or otherwise damage.

10. Please do not disassemble the product itself, so as not to damage the internal components. Removed or cannot enjoy the warranty service.

PS:More details,please download the specifications.

Accept OEM/ODM service,welcome to contact.